Greenbull Cablecam System FM12 III Pro

Greenbull Cablecam System FM12 III Pro

Item No.: FM12 III Pro

Introduction

FM12 III is a medium-sized cablecam device developed for DJI R2 and RS3 PRO, which
payload is 12kg, integrated with DJI RS SDK protocol, and has controls for stabilizers, cameras,
camcorders, aswell as focus-following, FM12 III is easy and quick to learn and operate with a
range of strong functions. It is increasingly widely used in live events, performances and
shows, sports competitions, concerts, music festivals, weddings and receptions, and of course,
film and television dramas, documentaries and outdoor reality shows to present an overhead
view of the scene.

Depends on the Modular design, FM2 III electronic control system can be detached from the
cablecam dolly to be used as a remote control camera system, mounted on the rocker, slide,
car mount, tripod, control DJI Ronin stabilizer and video camera or camera.

Specifications

Up to 12kgs playload.
integrated with DJI stabilizer control of the new generation of cablecam device.
As a flying cat ropeway, it can be used in many combinations

Depends on the Modular design, FM2 III electronic control system can be detached from

thecablecam dolly to be used as a remote control camera system, mounted on the rocker,

slide, car mount, tripod, control DJI Ronin stabilizer and video camera or camera.

Packing List

Box 1
1. FM12 III PRO Dollyx1
2. RC300-R Multi-function controller x1
3. DJI RS SDK adapter and ⏀ 3.5mm signal cable x1
4. M4*22 screws x1
5. L-type wrench (2.5/3mm) x2
6. Stabilizer and camera remote control receiver x1
7. L-type adapter plate x1
8. M4*8 screws x2
9. Ronin2 Pan axis arm pipe clamp x1
10. Camera remote control cable (⏀ 2.5mm audio port) x1
11. Camera control line (Sony Multi) ×1
12. D.BUS control cable ×1
13. B-port to DC (2.5 self-locking) spring-loaded power supply cable (20 to 100cm) × 1
14. DC 5V adapter ×1
15. Type-C power cable ×2
16. D-TAP to 5V USB adapter ×1
17. Manual and warranty card ×1
18. Antenna x6
19. Pedal controller ×1
20. Safety buckle x6
21. Ratchet tensioner and tensioning strap x4
22. Safety box x1
Box 2
23. Φ 8MM Polymerized Fiber Rope 300m and wire winder ×1
24. Wire rope tensioner ×2

RS3 PRO Powered Base/Recommended Version
1. RS3PRO Stabilizer Power Supply Base x1
2. Handle Battery Adapter x1
3. Reinforcement Bar x1
4. Base plate x1
5. DC to DC (2.5 self-locking) spring-loaded powersupply cable (20 to 100cm) x1
6. 1/4″-20 screws x3
7. M8 screws x3
8. L-shaped wrench (4/6mm) x2

Additional Information